How to Replace a Kia Sportage Replacement Key
For a number of Kia models the key comes with an integrated keyless entry system. The key can be compared to a remote control and can be replaced with a brand new one from a Kia dealer or a locksmith.
Key fobs might stop working due to a variety of reasons, including the battery of the coin is dead worn buttons signals, water damage, signal interference, and a defective receiver module. Here are some helpful tips on how you can get your Kia Sportage replacement key to work again.
How to replace the remote key or smartkey
Whether your Kia is equipped with an intelligent key, remote key push-to-start keys, or a standard non-transponder key made of metal the battery in these keys will eventually require replacement. This is especially in the event that your car displays a message indicating that the remote or smart key is not powered by the battery.
This is a relatively easy process. To replace the battery in the keyfob remove your mechanical key from the slit that is located at the back of the fob. Then, pry the cover open. Inside the key fob there will be tiny screws that hold the battery in its place. Using a small screwdriver, take the screw off and remove the old battery. Install the new battery and then close the gap on the key fob.
Test the key fob by pressing the lock/unlock buttons. It's good If the doors lock and unlock as expected. You can now utilize the hands-free feature to lock and unlock your Kia when your fingers get chilly or when you need to run errands around Brandon.
Note: Certain keys may require to be programmed (transponder chips or smart keys). This requires a specific programming machine that only the dealer or automotive locksmith can access. kia replacement key price uk (non transponder metal keys), do not need programming. If your keys need to be reprogrammed, you will need to be aware of the key code number written on the tag of the key code and record it in a secure location.
How to replace a battery
If your Kia key fob isn't responding when you press the lock or unlock button on the fob, this is a good indicator that the battery needs to be replaced. A weak battery could cause other issues, such as the check engine light coming on or the engine not cranking correctly. Fortunately replacing the key fob battery is a simple DIY task that requires only a few tools.
Before starting the process be sure that your vehicle is turned off and all doors are closed. Find the small, metal or plastic piece that is on the bottom of your key fob and play with it until a metallic key slips out. The key can be inserted into the driver door handle to unlock your car.
To replace the key fob battery, take off the cover on the rear and use a plastic bar tool to loosen the latch that holds the black negative battery cable. Remove the old battery and then orient the new one to ensure that the "+" positive side faces your face and the "-" negative side is facing towards the fob's metallic electrical contacts. Avoid using too much force when pushing the new CR2032 into place to avoid damage or bending the metal contacts.
Once the new battery is installed after which you turn the key fob off and then turn it on in the ignition for a few times until the door locks cycle. You can then test the Kia's key fob to ensure it's functioning properly.
How do you replace a smart key
Depending on the model of your Kia Sportage, you may have the standard key fob, or a smart key. The smart key features an embedded mechanical key blade, however, the standard key fob does not. Both key fobs come with batteries that eventually need to be changed. Fortunately, it's a fairly simple process that will take about two minutes.
Before you begin, you will want to ensure that you are on a flat surface with sufficient lighting and that your Kia is not on. Keep in mind that the fob contains small pieces that could fall when you're not careful.
The first step is to find the small release button on the lower backside of your fob. It could be a circular silver button or a rectangular slot. Once you press this the mechanical key blade will be released and you will be able to open the key fob.
After the key fob has been open, remove the old battery. The new battery is a one called CR-2032 and can be bought through the internet or at a local auto parts store. After you're done, your key fob should be able to lock and unlock your vehicle even if it's not running.
How do you replace the mechanical key?
The Kia key fob is a great option that lets us lock and unlock our car at the click of the button. But like any device it will encounter issues at times. There are solutions to resolve these issues and keep your key fobs in good working order for the duration of.
A dead or low-quality battery is among the most common issues. This could cause the fob to cease working or work intermittently. If this is the issue you should replace the battery a new one.
If this doesn't resolve the problem, try using a standard flathead screwdriver to wedge open the fob's plastic casing. Be careful not to damage any internal components or scratch the plastic. Once open, carefully remove the battery you have been using and replace it with a brand new one.
When the new battery is in, close and then open the doors with the mechanical key (every Kia fob has an emergency mechanical key that can fit in the slot). Test the key fob to check that it's functioning correctly. If the device isn't functioning, contact a locksmith or dealer to solve the problem. To avoid a lockout in the future ensure you have an emergency key that will work on all trunk and door cylinders.